2020 Exmark Lazer Z S-Series LZS801GKA524A2

Selling Price -

$14,999.00

Demo model

Information

2020 Exmark Lazer Z S-Series LZS801GKA524A2


With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders and machine health status.


Features may include:


Doing More With Propane

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.


Built to Last

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.


Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.


Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.


Less Time At The Pump

Gas-powered S-Series models have a single 12-gallon tank with one fill location.


On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.


Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Photos

Highlights

  • $14,999.00
  • Stryker, Ohio
  • New
  • LZS801GKA524A2
  • 2020
  • Exmark
  • Lazer Z S-Series LZS801GKA524A2
  • Model: FX801V | Spec: _S04
  • 25.5
  • Gas
  • Available
  • 64.8 in. (164.6 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
  • 316602631
  • 52
  • Fabricated
  • Kawasaki

Specifications

  • 2020
  • Exmark
  • Lazer Z S-Series
  • LZS801GKA524A2
  • Zero-Turn Mower
  • Model: FX801V | Spec: _S04
  • Brand: Kawasaki
  • 852
  • Series: V-Twin
  • 3,750 RPM
  • Heavy-duty canister air filtration system
  • Gas Carbureted
  • Fuel Indicator: Electronic Sender
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Drive Release: Allows unit movement without engine running.
  • Lever-actuated disc brake.
  • 23 x 9.5-12, 4 ply Turf Master® | Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
  • 23 x 9.5-12, 4 ply Turf Master®
  • 12-volt battery with 15-amp alternator.
  • Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50" thick caster yoke arms.
  • Blade Cutter Housing: 7.75" | Blade Shaft:
  • Deck: 52"
  • 64.8 in. (164.6 cm)
  • Blades: 3 Blades at 18.00" | 79.2 in. (201.2 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
  • 12-gallon (45.4-L), single fuel tank with single fill location.
  • Curb: 1134
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Style: Floating | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
  • 316602631
  • 52
  • Fabricated
  • Kawasaki