2024 Exmark Lazer Z S-Series LZS749AKC524A2

MoreLess
Limited Time Offer!

Selling Price -$15,499.00

2024 Exmark Lazer Z S-Series LZS749AKC524A2

With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:
  • Less Time At The Pump
  • On-Board Diagnostics
  • Ultracut Series 4 Deck
  • Built to Last
  • Fewer Grease Points
  • Tool-less Belt Removal
  • 2024
  • Exmark
  • Lazer Z S-Series
  • LZS749AKC524A2
  • Zero-Turn Mower
  • Model: ECV749 | Series: Command™ EFI | Spec: 3064
  • Heavy-duty canister air filtration system
  • 747
  • Kohler
  • 3,750 RPM
  • Fuel Indicator: Electronic Sender
  • Gas EFI
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 23 x 9.50-12, 4 ply Super Turf®| Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
  • 23 x 9.50-12, 4 ply Super Turf®
  • 12-volt battery with 20-amp alternator.
  • Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50" thick caster yoke arms.
  • Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
  • Deck: 52"
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • Blades: 3 Blades at 20.50" | 79.2 in. (201.2 cm)
  • 64.8 in. (164.6 cm)
  • 12-gallon (45.4-L), single fuel tank with single fill location.
  • Curb: 1136 lbs
  • Smart Controller | Engine hour meter and cup holder | UPC: 193308225470 | Carb Compliant | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 52
  • Kohler
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $15,499.00
  • Stryker, Ohio
  • New
  • LZS749AKC524a2
  • 2024
  • Exmark
  • Lazer Z S-Series LZS749AKC524A2
  • Kohler
  • 26.5
  • Gas
  • Available
  • 64.8 in. (164.6 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • 52
  • Kohler
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.