2017 Exmark Lazer Z X-Series LZX980EKC726T0

90 day warranty
MoreLess
Limited Time Offer!

Selling Price -$12,595.00

2017 Exmark Lazer Z X-Series LZX980EKC726T0

What you get when you check all the boxes.

And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Features may include:
  • Patented RED Technology

Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

  • UltraCut Series 6 Deck

This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

  • A New Level of Comfort

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

  • Productivity

Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

  • Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

  • Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

  • 2017
  • Exmark
  • Lazer Z X-Series
  • LZX980EKC726T0
  • Riding
  • ECV980
  • Kohler® | Command™ EFI
  • Electronic Fuel Injected
  • 3,650 rpm | Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
  • 999 cc.
  • Heavy-duty canister air filtration system
  • Gas EFI | Fuel Indicator: electronic Sender
  • 86.1 in. (218.7 cm)
  • 84.9 in. (215.6 cm) | Cutting Deck: 72"
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • Deck: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. | Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
  • 3 Blades at 24.50" Length | Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • MagStop Electromagnetic 250-ft-lbs clutch with spot brake
  • 12-volt battery with 25-amp alternator.
  • Lever-actuated disc brake.
  • Hydro-Drive | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
  • Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • 12-gallon (45.4-L), single fuel tank with single fill location.
  • 24 x 12.0-12, 4-ply Turf Master®
  • 24 x 12.0-12, 4-ply Turf Master®
  • .50" thick caster yoke arms. | Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
  • 1276 lbs.
  • Carb Compliant | Cup Holder | 2-post foldable ROPS standard with seat belt and latch.
  • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 316639115
  • 72
  • Fabricated
  • Kohler
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $12,595.00
  • Stryker, Ohio
  • Pre-Owned
  • LZX980EKC726-9115
  • 2017
  • Exmark
  • Lazer Z X-Series LZX980EKC726T0
  • ECV980
  • 38
  • 729
  • Gas EFI | Fuel Indicator: electronic Sender
  • Available
  • 84.9 in. (215.6 cm) | Cutting Deck: 72"
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • 316639115
  • 72
  • Fabricated
  • Kohler
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.